F Ball Styccobond F73 Plus Heavy Duty 1 Part Flooring Adhesive 7.5KG

STYCCOBOND F73 PLUS is a single pack, fibre-reinforced moisture curing heavy duty flooring adhesive suitable for installing a wide range of floorcoverings and for artificial grass. It is water resistant and suitable for outdoor use.  It is resistant to oil and grease and is suitable for use over normal underfloor heating systems.

STYCCOBOND F73PLUS can be used for securing needlepunched / fibre bonded carpets, artificial grass, PVC, latex, polyurethane and rubber backed carpets, vinyl and rubber floorings, in both sheet and tile format.

STYCCOBOND F73PLUS can be applied to STOPGAP smoothing underlayments, sound,
smooth subfloors of concrete, granolithic, sand/cement screeds and plywood.

When laying impervious floorcoverings onto non-absorbent subfloors e.g. vinyl flooring onto terrazzo, the subfloor must be prepared and skimmed with a minimum 3mm of the appropriate STOPGAP smoothing underlayment to assist curing.

• Colour: White
• Consistency: Viscous Liquid
• Open Time: 20 - 30 minutes depending on temperature, humidity and absorbency of the subfloor
• Cure Time: Initial set from 90 minutes, Full cure 24 hours

• Coverage Rate (Approx.):

3.3 per kg with a A2 trowel,
2.6m² per kg with 2mm x 6mm trowel or
1.8m² per kg with 3mm x 6mm trowel.

• Coverage Per Unit:

24.75m² per kg with a A2 trowel,
19.5m² per kg with 2mm x 6mm trowel or
13.5m² per kg with 3mm x 6mm trowel.

Note: Coverage rates will depend on the condition and absorbency of the subfloor.